屏蔽线选型资料-2

发布于:2021-09-22 00:38:12

5
4

Shield (Screen) Clamping Saddles
Shield (screen) clamping saddle, 11 mm / 0.433 in wide For conductors with a diameter of up to 8 mm / 0.315 in Shield (screen) clamping saddle, 19 mm / 0.748 in wide For conductors with a diameter of 7 mm / 0.276 in to 16 mm / 0.63 in

Note: Cannot be used for the connection of ground (earth) conductors!

Recommended tightening torque: 0.5 Nm

Description
Shield (screen) clamping saddle, incl. knurled screw Diameter of connectable conductor

Pack.-unit pcs Shield (screen) clamping saddle, 11 mm/0.433 in wide up to 8 mm /0.315 in 790-108 50

Item-No.

Pack.-unit pcs Shield (screen) clamping saddle, 19 mm /0.748 in wide 7 mm /0.276 in to 16 mm /0.63 in 790-116 50

Item-No.

Accessories
Carrier w. grounding foot, bar 90° to the rail, 10 mm (0.394 in) x 3 mm (0.118 in), bar a. foot – Cu w. tin plating Carrier w. grounding foot, bar parallel to the rail, 10 mm (0.394 in) x 3 mm (0.118 in), bar a. foot – Cu w. tin plating Carrier w. 2 grounding feet, bar parallel to the rail, 10 mm (0.394 in) x 3 mm (0.118 in), bar a. foot – Cu w. tin plating Carrier rail, special perforated, 1000 mm/3’.3’’ long, Cu with tin plating, special lengths on request Stand off, for special perforated carrier rail, use M 5 size screw Straight busbar, 10 mm (0.394 in) x 3 mm (0.118 in), bar – Cu with tin plating Insulated mounting foot, for busbar, with standard screw M 4 x 8 mm Insulated mounting foot, for busbar, with sheet metal screw (3.5 x 9) mm U-shaped busbar, 10 mm (0.394 in) x 3 mm (0.118 in), Cu with tin plating 45 mm /1.772 in long
790-113 25

45 mm /1.772 in long
790-113 25

45 mm /1.772 in long
790-114 25

45 mm /1.772 in long
790-114 25

125 mm /4.921 in long 790-115

25

125 mm /4.921 in long 790-115

25

790-145

1

790-145

1

790-144 1000 mm /3’.3’’ long 210-133 30 mm /1.181 in long 790-133 50 mm /1.969 in long 790-134

200 (2 x 100) 20 (20 x 1) 20 (20 x 1) 20 (20 x 1) 50 (2 x 25)

790-144 1000 mm /3’.3’’ long 210-133 30 mm /1.181 in long 790-133 50 mm /1.969 in long 790-134

200 (2 x 100) 20 (20 x 1) 20 (20 x 1) 20 (20 x 1) 50 (2 x 25)

grey

790-100

grey

790-100

grey

790-101

50 (2 x 25)

grey

790-101

50 (2 x 25)

Item-nos. and dimensions, see drawing on page 5.5

Item-nos. and dimensions, see drawing on page 5.5

Application notes
The shield (screen) clamping saddle is shipped ready for direct connection to the busbar 10 mm (0.394 in) x 3 mm (0.118 in) or to a drilled mounting plate. After connection, tighten the knurled screw to complete the installation.

To remove a shield (screen) clamping saddle, unscrew until ratcheted mechanism is released, then slightly tip saddle and remove the clamping saddle.
Assembly Removal

?

? ? w

w?


相关推荐

最新更新

猜你喜欢